Bolt these brackets straight onto your existing Tough touring rack to make a strong / stiff and easy to install mount for most brands of Pole Less Wing awnings.  
 
Purpose built to allow "independent awning to Roof top tent ' Installations - These Brackets have undergone 6 variations in past years to facilitate easier installations...
 
Included in the options tab is the 4th Top Hat bar plank... As our racks are sold with just 3 planks, the 4th one is usually required for all independent awning to tent installs as it is necessary to place the awnings rear triangulation bracket behind the tent - further back than where the tent can mount so that you can still get to latches on the back of the tent. 
. 
These Brackets bolt straight on to our Top Hat Roof rack planks - (All models of existing Tough Touring Roof top tent racks) and the combination of Rack + Awning Bracket gives unrivalled stiffness and easy install as well as super light weight overall comparted to any of our competitors racks..
 
The Bracket kits come in an  UP mount configuration - The bracket sits 180mm above the rack. (typically right beside your tent - tents average heights are between 200 and 300mm so there is no overall height increase.)
 
 
LAND CRUISER 200 and 300 Series Owners, Y62 OWNERS TO NOTE
 
NOTE THAT LC 200 ,300 and Y62 Owners  AWNING WILL FOUL SLIGHTLY ON REAR DOORS WIND FAIRING. - YOU WOULD  IDEALLY INSTALL FOAM PADDING ON THE AWNING ARM TO PREVENT PAINT RUB... 


WARNING ON 'DOUBLE ENDED AWNINGS - FORWARD 180 - REAR 270 Like the XT MAX. 
 
Note that these Brackets CANNOT BE USED in conjuntion with DOUBLE ENDED folding awnings like the Bush company MAX - as the front bracket needs to sit beside the RTT and is not able to stop the forward arm flexing.  This Bracket SUITS ONLY REAR FOLD OUT 270 AWNINGS.
 
These brackets were designed for fitting by professionals. However the fittment is as close to easy as we've ever seen.

The Brackets come in Passenger or Drivers side and come complete with Forch High Tensile mounting hardware, a Hook Bracket and Logo Plates. (5 Piece Laser cut kit). 
 
Please note that the Top Hat Bar Planks vary in price from us for between $130 and $160 AUD... However freight on these is MENTAL - as they are over a metre long we get slugged around $100 in freight to post them out. (Thats why the option adds $230... 
Let us know in the notes what length bar plank you'll need - It should be 50-100mm longer than the ones you already have on your truck... 
They come in 1400, 1450,1550... 
 
More information on these products can be found here.