Land Rover Discovery 4 Factory rails Roof Top Tent Rack
Tough Touring has designed a cross bar system that bolts straight onto the factory rails on Discovery 4 - specifically for the fitting of Roof Top Tents. The Rack itself is as Low, Light and Strong as we can build it -
Its a Simple System consisting of 3 x Top hat bar planks / T Bolts and Rubber anti vibration stripping.
Capable of handling Very Heavy loads on Off road environments - The Tough Touring Racks are so low they help reduce wind noise while getting the weight of the touring gear lower to minimise any body roll and help maintain stock vehicle stability.
The Roof Racks are shortened at the rear to allow awnings to swing through their arc and be set up without fouling on the rear Wind fairing - also providing a covering effect of the wing awning (If Fitted) preventing rain ingress into the rear cargo area.
Heights overall of the Roof rails are 10 -20mm above the highest point in the disco's roof skin, the top hat bar planks add 33mm to that - with a safe estimate of total rack height being just 55mm hig
The Disco 4 Factory Rail Tough Touring Roof top Tent rack Kits includes:
3 x Top Hat Bar planks (Your chosen Width Below)
16 x 20mm Countersunk Hex Head bolts and Nyloc nuts for fastening roof planks to rails.
*Unique Design means all bolts to roof rack planks are accessable from beside the vehicle for easy removal and Fitting once fitted.
All components manufactured in Australia, Sand blasted for maximium paint durability and Finished in Dulux Black Textura Powdercoat and Baked at over 500 Degrees Celcius for Ultimate durability.
Please tell us if your fitting a roof tent
Technical / Fitting
Fitting:
Tough Touring roof rails can be fitted by any roof rack fitter, or yourself if your handy. Included is a tube of Sikkaflex 221 Automotive sealant and new High tensile steel mounting bolts. Adding the rail planks is easier on the back - as the unique design of the TT roof rails allows all bolts to be accessed from beside the vehicle.
Installation:
Adaptability:The Roof racks have been designed by us to to accomomodate awnings and roof top tents specifically without fouling on Vehicle wind fairings etc on most popular awning brands available toda
Our Vehicle Specific 'One Piece ' roof rail Kits for the vehicles above follow the vehicles roof lines perfectly while positioning the rack precisely around foul points / Protruding wind fairings - they have been tested with most of the awning and tent combinations listed and are the closest possible fit we can achieve.