This Bracket set allows Fitment of Pole less 270 Wing awnings to Dual Cab Utes - Bridging the articulation Point. 
 There are 2 Options for this kit,  Up mount and Mid Mount.
 
You can add a note should you have un-level front and rear racks - ie MID mount front and UP mount rear will adjust heights down at the front by 40mm. (Up is 40mm Higher than MID) 
 
All brackets front and rear have integrated slotted mounts, with tollerences for adjustments up and down +_ 40mm or so. These work well  for some awnings with North south Block mounting plates such as the  Ostrich wing awning. Other awnings with longitudinal mounting tracks may need level racks or correct combinations of MID and UP mount brackets to sort level fitment . All eforts are made on the bracket sets to accommodate the majority of mounting systems on Awnings these days, but there are about 40 awnings we've listed now, and the list grows... 
 
We've found that a front bracket and a good strong rear bracket + Our hook bracket is the best combination - (Just 2 mount points for the awning itself). 
 
We would not advise to use this kit in combination of any forward folding awnings, it is best suited to rear 270 WIngs Only. 
 
You can purchase the flexing front bracket individually in the options below or as a complete kit which includes a single rear bracket of your choice Plus our Famous hook bracket.
 
Please complete the options in the fields below - stating front rack type, Rear rack type dont worry -  we will call you if we need further clarification.  - you can't get it wrong. (We check it all carefully)
 
The Tough Touring  Flexing Front awning to rack mounting bracket is required on all  Dual cab utes where articulation between the cab and tray body prevents longer awnings being fitted. 
 
OPTION 1 - COMPLETE UP MOUNT BRACKET SET WITH FRONT FLEXING BRACKET
 
OPTION 2 - COMPLETE MID MOUNT BRACKET SET WITH FRONT FLEXING BRACKET
The bracket set 'bridges' front and rear racks with an articulating / Flexing front bracket that allows movement up / down and sideways while still preventing droop or vibration through the awning
 
OPTION 3 - COMPLETE BRACKET SET MID MOUNT FLEXING FRONT, UP MOUNT REAR 
 
OPTION 4 - COMPLETE BRACKET SET UP MOUNT FRONT, MID MOUNT REAR
 
OPTION 5 - SINGLE FRONT FLEXING BRACKET ONLY This kit is the front flexing bracket only and comes in an UP mount configuration. 
 
Build for dual cabs like the 79 series, Nissan Navara, amarok, Dmax, Ranger, Hilux etc, We have honed this bracket set to perfection !
 
Version 7 now in General Release... We have descided to combine the existing racks bracketse available here - with twin layer 'flexing' 2nd point bracket being added to the front bracket to allow further twist...
 
 
Please note: Please let us know if your combination of Front and rear bracket or plank types, Many of the foundation brackets we use to assemble this kit are bolt up fitments and they are used in all our other kits.
(ie the componets would typically be combined with our other awning to rack kits such as the Awning to ARB rack, or Awning to Rhino Rack for the rear two brackets and Hook bracket to make a complete set. )