Tough Touring makes a  Platform roof rack  Capable of handling Very Heavy loads on Off road environments .
 
 The Tough Touring Platform Racks are so low they help reduce wind noise while getting the weight of the touring gear lower , Minimising any body roll and maintaining vehicle stability.
 
This listing is suitable for Discovery 3 or  4 vehicles that  have factory roof rack rails already fitted.  The Platform mounts straigth  to the factory the rails on your Disco using Steel foot brackets combined with ABS locating blocks TBOLTS and M8 Dome Nuts...... If your Discovery 4 does not have factory rails fitted,  you need a different kit -  our full Discovery 4 Roof rack kit with roof rails included is listed here - https://www.toughtouring.com.au/product-page/copy-of-land-rover-d3-platform-roof-rack
 
The Platform Itself is an East west Cross Bar Plank Design - With Every Plank Slotted on the tops and side - to allow maximum versatility with any desired accessory fitment - Rated Eye bolts can be fitted inset also below the Platform profile height to add fast tie down points without sacrificing slide on slide off ease when carrying large flat objects. The Roof Racks are shortened at the rear to allow 270 Degree Pole Less wing awnings to swing through their arc and be set up without fouling on the rear Wind fairing.
 
Australian Designed and Tested - Built Tough and Versatile to meet the needs of your next adventure - be it work or play - this is the most versatile rack on the market today for the Discovery.
 
The Disco  4 Tough Touring Platform (Factory Rails) Roof rack Kits includes:
 
* 8x  90 Degree Folded Rack Steel TABS for connection of Platform to the Factory rails  (4 Each side) 4 are shorter for the front and back ones and 4 are longer for the middle... (The Rail Rolls 5mm Each end) 
* 6 x LONG ABS Plastic 5mm Spacer Blocks 
* 2 X Short ABS Plastic 10mm Spacer Blocks  (front two) 
* 1 x Black Powdercoated 2mm Aluminium Touring Platform (PRE ASSEMBLED)1350mm x 2100mm 
* 20 x Unistrut mounting Nuts for tabs 
* 4 x 1 Tonne Rated Eye Bolts
* 1.2M of Anti vibration tape
* 1 x TT wind fairing 1100mm ...
* 8 x 16mm Dome Nuts (m8)
* 10 x 25mm Dome nuts (m8)
 
*Unique Design means all bolts to roof rack planks are accessable from beside the vehicle for easy removal and Fitting once fitted.
 
All components manufactured in Australia, Sand blasted for maximium paint durability and Finished in Dulux Black Textura Powdercoat and Baked at over 500 Degrees Celcius for Ultimate durability.