Tough Touring makes a Touring Platform roof rack specifically for the Land Rover Discovery 4, The Rack itself is as Low Profile Sitting just 15mm Off the Roof. Capable of handling Very Heavy loads on Off road environments - The Tough Touring Platform Racks are so low they help reduce wind noise while getting the weight of the touring gear lower , Minimising any body roll and maintaining vehicle stability.
 
The Platform Itself is an East west Cross Bar Plank Design - With Every Plank Slotted on the tops and side - to allow maximum versatility with any desired accessory fitment - Rated Eye bolts can be fitted inset also below the Platform profile height to add fast tie down points without sacrificing slide on slide off ease when carrying large flat objects. The Roof Racks are shortened at the rear to allow 270 Degree Pole Less wing awnings to swing through their arc and be set up without fouling on the rear Wind fairing.
 
Australian Designed and Tested - Built Tough and Versatile to meet the needs of your next adventure - be it work or play - this is the most versatile rack on the market today for the Discovery.
 
The Disco 3 and 4 Tough Touring Platform Roof rack Kits includes:
 
* 2 x Super Low Roof Rack Foot rails specificly Laser cut for the Discovery roof line - Folded to either 75 'Infold'
* 8 Oversized 80 Degree Folded Rack feet (4 Each side) - 
(the 4 x Oversized feet are folded inbound ... and Pre cut to suit the Disco Factory 4 x m10 bolts..) * New M10 HEX bolts
* ABS Plastic 10mm Spacer Blocks x 8 
 
*1 x Black Powdercoated 2mm Aluminium Touring Platform (PRE ASSEMBLED) 1350mm x 2100mm - Universally slotted to accept common Unistrut mounting tabs on every plank and upward facing surface
 
* 10 x Unistrut mounting tabs + Bolts for Fittment of Platform (Combination of m8 ) 
 
16 x 20mm Countersunk Hex Head bolts and Nyloc nuts for fastening roof planks to rails. 
 
*Unique Design means all bolts to roof rack planks are accessable from beside the vehicle for easy removal and Fitting once fitted.
 
All components manufactured in Australia, Sand blasted for maximium paint durability and Finished in Dulux Black Textura Powdercoat and Baked at over 500 Degrees Celcius for Ultimate durability.