Mitsubishi Pajero Roof top Tent RACK
Tough Touring makes a Super Low mount , outward folded roof rack specifically for Many common Vehicles, Pajero Kit has been designed with seperate Rack feet (Four each side) for superior strength and super low mount. Especially Well Suited to Fittment of Roof top tents due to its low stature and strong design.
I you drive A Pajero and you need the Lowest / Strongest and easist rack to add and remove your roof top tent too - this rack is specifically built for roof top tent use.
This rack design Can be set up to allow the roof top tent and planks to be removed from beside the vehicle via 4 Captive bolts each side - Removing the entire set up in minutues and leaving the vehicle with Bare roof and only the rack feet...
Our custom designed rails and crossbars form a super strong, low foundation for your chosen roof top tent and Awning Combination. Capable of handling typical Hardshell Tent loads on Off road environments - The Tough Touring Racks are so low they help reduce wind noise while getting the weight of the touring gear lower also helps reduce body roll and improve vehicle stability.
We would Reccommend Fitment of your awning directly to the side of suitable roof top tents where possible - As Clearances are tight on most of the vehicles mentioned, and Rack mounted awnings tent to end up Lower overall /
The Pajero Tough Touring Roof rack Kits includes:
* 2 x Super Low Roof rails specificly Laser cut for the Pajero roof line.
* 3 x Aluminium Top Hat Bar Planks.
* Assorted Aluminium (laser cut) spacers
* 16 x High Tensile Hex Bolts and washers for rail mounting into the rail channels
1 Tube Sikka flex Adhesive sealant
16 x 20mm Countersunk Hex Head bolts and Nyloc nuts for fastening roof planks to rails.
*Unique Design means all bolts to roof rack planks are accessable from beside the vehicle for easy removal once fitted.
All components manufactured Australian Mild Steel, Sand blasted for maximium paint durability and Finished in Dulux Black Textura Powdercoat and Baked at over 500 Degrees Celcius for Ultimate durability.
Tough Touring Reccommends that these components are Fitted by a Professional Installer.
Tech detail - PROFESSIONAL FITTERS NOTES
The Tough Touring roof rack Creates the strongest mouting platform we can make available for this vehicle.
The Rack will sit approximatly 25mm off the vehicles roof and it is just 33mm thick up from there, adding around 60mm to the vehciles overall heightInstallation
Tips on Installation are here online in Video format - https://youtu.be/PlXv-3uHB30?si=QvMT3V3QbP1xfIV3
Our Aluminium Top Hat Bar planks can be ordered in longer sizes up to 1550mm but come standard Unless Specified at 1350mm to match almost all quality roof top tents.Check your Pajero has mounting holes ...
Tough Touring has tested and fitted only a few of our racks to PAJERO vehicles - At time of writing were at V3 of our R&D on this vehicle. To find out more about what that means to you - See our Versions Explanation page here - https://www.toughtouring.com.au/about-1
Before purchasing any roof rack - Check your vehicle roof gutter cavity for roof rack mounting bolt holes... if it doesnt have any - and it has curtain airbags -
2020 onward cars can be the worst vehicle to deck out with rtt or pole less awings ... Possibly due to increased Safety requiremtsn, Manufacturers have litterly fillled the cavity space in the roof with airbags... To make life a little harder for Mechanics and Fitters - the roof lining is also moulded / brittle one piece solid foam and is easily damaged when removed... damage is likely duriing roof lining removal...It is wise to consult with a professional vehicle fitter before attempting a home install of this rack...