The Bundutec Suite base provides travellers with a large - 2m x 1.2m pop out shower / Toilet cubicle room,  Its the fastest Anti moisture  privacy room that we've seen, sitting on a pop out Aluminium Frame and surrounded by a magnetised / velcro stiffening battern system around its base to weigh down the walls and provide a fast and semi ridgid frame. The Suite is Covered by the Included Bundutop ANNEX - creating a covered room. 
 
The wall facing the vehicle has a large zippered opeing allowing through window access to vehicle if required. (perfect place to leave clothes while in the shower) 
 
Eyelets at the base of the awning walls allow pegging down, bases of the walls have aluminium batterns for improved rigidity in wind.  
 
This Size is the best size we've used for showering - as splashed water does not wet your  towel hanging over the side... Beware of 1m x 1m shower cubes, They are fine if you like drying yourself with wet towel. :) 
 
If installing the Bundutec SUITE in Conjunction with a 270 Degree wing awning, we would reccommend the suite be installed using Tough Touring AWNING TO BUNDUTOP TENT brackets - these new kits integrate all components for easier install and much nicer finish. 

The Suite and Annex can present fouling issues on the Bundutec Tents Ladder - if the ladder is to be installed inside the room... Typically the ladder mounts don't have enough room to sit between the tent and the Suites back plate Unless the SUITE is Installed HIGH on the bottom tent section. Some customisation is usually required to make these work together well.