Tough Touring makes a roof rack specifically for the fitting of Roof Top Tents to LandRover Discovery 3 and 4, The Rack itself is as Low, Light and Strong as we can build it, It utilises the Landrovers inset M10 Roof bolts for enormous load strength. 
 
Capable of handling Very Heavy  loads on Off road environments - The Tough Touring Racks are so low they help reduce wind noise while getting the  weight of the touring gear lower to minimise any body roll and help maintain stock vehicle stability.  'Top Hat Bar Planks' are fitted Each East west across the Foot rails, Allowing easy installation and removal of roof top tents.
 
The Roof Racks are shortened at the rear to allow awnings to swing through their arc and be set up without fouling on the rear  Wind fairing - also providing a covering effect of the wing awning (If Fitted) preventing rain ingress into the rear cargo area. 

Heights overall of the Roof rails are 10 -20mm above the  highest point in the disco's roof skin,  the top hat bar planks add 33mm to that - with a safe estimate of total rack height being just 55mm hig
 
 
The Disco 3 and 4 Tough Touring Roof top Tent rack Kits includes:
 
* 2 x Super Low Roof Rack Foot rails specificly Laser cut for the Discovery roof line - Folded though 105 'OUTFOLD'
* 8 Oversized 80 Degree Folded Rack feet (4 Each side) - 
 (the 4 x Oversized  feet are folded inbound ... and Pre cut to suit the Disco Factory 4 x m10 bolts..) * New M10 HEX bolts
* ABS Plastic 10mm Spacer Blocks  x 8 
 
3 x Top Hat Bar planks (Your chosen Width Below) 
 
16 x 20mm Countersunk Hex Head bolts and Nyloc nuts for fastening roof planks to rails. 
 
*Unique Design means all bolts to roof rack planks are accessable from beside the vehicle for easy removal and Fitting once fitted.
 
All components manufactured in Australia, Sand blasted for maximium paint durability and Finished in Dulux Black Textura Powdercoat and Baked at over 500 Degrees Celcius for Ultimate durability.